Sam4s ER-230 Series - Program Mode Programming; Default Programming; Descriptor Programming; Program Overlay Method

Sam4S ER230 Series Electronic Cash Register AU Program Mode Programming • 73
Program Mode Programming
Default Programming
• All keyboard PLUs are Taxable, Preset and Override, without entry limits by default status
programming of “400000000”.
• All system options are set to 0 in default programming, unless otherwise noted. Change only the
options that will deviate from default programming. There is no need to re-enter an option status
of 0, since 0 is its original setting.
• All programming (unless otherwise noted) is done with the control lock in the P position. Each
section details a specific area of register programming.
• The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST
already.
Descriptor Programming
Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages. During
descriptor programming, the keyboard button functions changes to the layout shown below.
Program Overlay Method
ER-230 Alpha Keyboard Overlay
CAPS L DOUBLE V Q
SPACE K Z U P
M W R
J Y T O
N X S
6
B
5 4
G
9
A
8 7
F
C
1
H
BACK E
D
0
I
2
.
3
00