Sam4S ER230 Series Electronic Cash Register AU Operating Instructions • 37
Preset Percent Discount on Sale Total
In this example the %1 function is programmed with Percentage, Negative, Sale, Preset and
Overridable with a rate of 10%. Please refer to % (1 ~ 5) (Discounts or Surcharges) in
Function Key Programming in Program Mode Programming for more detail.
1. Register the item.
2. Press the SBTL key:
SBTL
3. Press the %1 key:
% 1
4. The discount is automatically subtracted.
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
PLU2 $10.00
% 1 -10.000%
AMOUNT -1.00
TOTAL $9.00
CASH $9.00
CLERK 1 No.000011 00001
Enter a Percent Discount on Sale Total
You can also operate the percentage functions by entering the percentage of the discount or
surcharge. You can enter a fractional percentage up to 3 digits beyond the decimal (i.e.
99.999%) if necessary.
1. Register the items you wish to sell.
2. Press the SBTL key:
SBTL
3. Enter the percentage, and then press the
appropriate discount key.
For example, for 15% enter:
5 1 %1
4. The surcharge is automatically added.
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
PLU2 $10.00
% 1 15.000%
AMOUNT $1.50
TOTAL $11.50
CASH $11.50
CLERK 1 No.000011 00001
For Surcharge Operation
When a % function is preset with “Percentage, Positive, Item, Preset and Overridable” or
“Percentage, Positive, Sale, Preset and Overridable” with a preset percentage ratre, the %
function key will perform as a Surcharge on Item or Sale. Of course a override rate can be
put in manually. Please refer to operation sequences on previous.
For setting, please refer to % (1 ~ 5) (Discounts or Surcharges) in Function Key
Programming in Program Mode Programming for more detail.
To Next Page
Loading...
