Sam4s ER-230 Series - Program 1100 - Cash-In-Drawer Limit Programming

146 • Contents Sam4S ER230 Series Electronic Cash Register AU
Program 1100 - Cash-In-Drawer Limit Programming
You can set a limit for cash in drawer. When cash in drawer exceeds the limit you program here, a warning will
display on the screen. You must press CLEAR to remove the warning and continue operations. The warning
will continue to appear at the completion of every transaction with the limit exceeded, until you use the PAID
OUT function to remove cash from the drawer.
Programming the Drawer Limit
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 1 1 0 0, press the SBTL key.
0 SBTL 0 1 1
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
X/TIME
Enter the cash limit,
u
p
to 8 di
g
its
4. Press the CASH key to finalize the program.
CASH