Sam4s ER-230 Series - Code PLU Entry - Preset Price Override; Code PLU Entry - Repeat

28 • Contents Sam4S ER230 Series Electronic Cash Register AU
Code PLU Entry - Preset Price Override
If the OVERRIDE PRESET is set to Y (yes), the PLU is operating as a preset override PLU.
See "PLU Programming" in the "Program Mode Programming" chapter to program PLU
descriptors and options.
1. Enter the quantity of items being
purchased, and then press the X/TIME
key, even there is only one item.
For example, enter 1 on the numeric key
pad and press the X/TIME key:
1 X/TIME
2. Enter the PLU number; press the PLU
key.
For example, enter:
2 PLU
3. Enter an amount on the number pad. Do
not use the decimal key.
For example, for $2.99, enter:
2 9 9
4. Press the PLU key again.
PLU
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
1 @$2.99
PLU2 T1 $2.99
GST $0.18
TOTAL $3.17
CASH $3.17
CLERK 1 No.000011 00001
Code PLU Entry - Repeat
Open or preset price PLUs can be repeated as many times as necessary by pressing PLU
function key again. The number of times the item is repeated is shown on the display.
1. Enter the PLU number; press the PLU
key.
For example, enter:
1 PLU
2. To register a second item exactly as the
first, press the PLU key again.
PLU
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
PLU1 T1 $2.99
PLU1 T1 $2.99
GST $0.36
TOTAL $6.34
CASH $6.34
CLERK 1 No.000011 00001