Sam4s ER-230 Series - Code PLU Entry Methods

Sam4S ER230 Series Electronic Cash Register AU Operating Instructions • 31
Modifier Key
Pressing a modifier key alters the next PLU registered, either by changing the code number of
the PLU so that a different item is registered, or by just adding the modifier descriptor and
registering the same PLU. See "Modifier 1-5" in the "Program Mode Programming"
chapter in order to determine how the modifier key will affect the PLU entry.
This is often used to change the size, package, pricing or even eatin/takeaway, hot/cold etc., status
of PLUs. Discuss your requirements with your dealer. The PLU Report lists these items
separately.
Modifiers can be:
• Stay down so that registrations will be modified by the same modifier until another
modifier is selected,
• Pop-up after each item to register, for example large, medium or small soft drink,
• Pop-up after each transaction to register, for example, toppings of various pizza
sizes.
See "System Options" in the "Program Mode Programming" chapter to select stay
down/pop-up status.
Pop-Up Modifier Key Affecting PLU Code
For example: PLU 1 is DRINK for $1.00 and PLU#1001 is DRINK for $1.25 as large.
The Modifier 1 Key descriptor is LARGE.
1. Press a preset PLU key.
For example, press PLU 1 with a price of
$1.00.
1
2. Press the MOD 1 key. The message
"MOD1" displays.
MO D
1
3. Press the same PLU key. In this example
the modifier 1 will add the digit 1 to the
fourth PLU # position, resulting in the
registration of PLU #1001.
1
4. Press another PLU key. In this example
press PLU 2 with a price of $1.50.
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
DRINK $1.00
LARGE
DRINK $1.25
PLU2 $1.50
TOTAL $3.75
CASH $3.75
CLERK 1 No.000011 00001