140 • Contents Sam4S ER230 Series Electronic Cash Register AU
Program 701 - Financial Report Message Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select ‘No’ in system
option #25 (See “System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
Programming the Financial Report Message
The Financial Report selection allows you to reprogram the descriptors that appear with the Financial
Report totals and counters. For example, the first total on the financial report "+PLU TTL" represents
the total of all positive PLU entries. You might wish to re-label this total to say "FOOD SALES". You
can reprogram any of the Financial Report totals listed here with any 18-character descriptor. (See
“Financial Report Message”).
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 7 0 1, press the SBTL key.
1 SBTL 0 7
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
X X/TIME
4. If you are programming using alpha overlay,
Type up to 12
descriptor keys
SBTL
or,
SBTL
Enter up to 12
three-character codes
5. Press the CASH key to finalize the program.
CASH
To Next Page
Loading...
Need help?
General
