Sam4s ER-230 Series - Code PLU Entry - Open Price; Code PLU Entry - Preset Price; Single Item

Sam4S ER230 Series Electronic Cash Register AU Operating Instructions • 27
Code PLU Entry - Open Price
If the PRESET status of a PLU is set to N (no), the PLU will operate as an open PLU. See
"PLU Programming" in the "Program Mode Programming" chapter to program PLU
descriptors and options.
1. Enter the PLU number; press the PLU
key.
For example, enter:
2 PLU
2. Enter an amount on the number pad. Do
not use the decimal key.
For example, for $2.99, enter:
2 9 9
3. Press the PLU key again.
PLU
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
PLU2 T1 $2.99
GST $0.18
TOTAL $3.17
CASH $3.17
CLERK 1 No.000011 00001
Code PLU Entry - Preset Price / Single Item
1. Enter the PLU number; press the PLU
key.
For example, enter:
1 PLU
Receipt Example:
THANK-YOU
CALL AGAIN
DATE 15/01/2003 WED TIME 08:33
PLU1 $1.29
TOTAL $1.29
CASH $1.29
CLERK 1 No.000011 00001