Sam4s ER-230 Series - Miscellaneous Programming; Program 1500 - Macro Key Sequence Programming

138 • Contents Sam4S ER230 Series Electronic Cash Register AU
Miscellaneous Programming
Program 1500 - Macro Key Sequence Programming
Macros are special function keys that are used to execute a sequence of key depressions. For example,
a macro might be used to execute a string of reports or to automatically tender a preset amount. Up to
ten different macros may be placed on the keyboard. (See "Function Key Assignment Programming”
to place macros on the keyboard.)
To Program a Macro
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 1 5 0 0, press the SBTL key.
0 SBTL 0 5 1
3. Press the Macro key that you wish to program.
MACRO
4. Type up to 50 key stokes
Type up to 50 key strokes
5. Press the same Macro key to end the sequence
MACRO
6. Repeat from step 3 - 5 to program additional macros. Press the CASH key to
finalize the program.
CASH
To removing a Macro
If you wish to remove a keystroke from a macro, replace the current function with the
INACTIVE function.