Samsung AM080FX A Series - Page 370

Key Options
Samsung Electronics 389
■ Push Button Type
AM140/160/180/200/220/240/260/280/300KXVSSSS
※ Setting outdoor install option
K1 K2 K3 K4
Start
Outdoor unit address.
Quantity of indoor units
Quantity of MCUs.
Save
Main unit?
Heat recovery?
Yes
Yes
Yes
No
No
Step Button Display Description Note
Outdoor unit address
Step1
Outdoor unit
display
Setting required
Step2
Press (K1+K2)
for 2 seconds
Unit address
for module
combination
00: Main unit
K4 x 1 time
01: Sub1 unit
K4 x 2 times
02: Sub2 unit
K4 x 3 times
03: Sub3 unit
Step3
If it is main unit, go to step4.
Otherwise, press K2 button for 2 seconds to save & exit
(system will be reset)
Quantity of indoor units
Step3 Press K1
Ready to set-
Step5
K2 x n times
Tens digit (0 ~ 6)
Ex) 03 : 3 units
64 : 64 units
K4 x n times
Ones digit (0 ~ 9)
Step6
If it is heat recovery model, go to step 7.
Otherwise, press K2 button for 2 seconds to save & exit
(system will be reset)
Quantity of MCUs * Heat recovery model only
Step7 Press K1
Ready to set-
Step8
K2 x n times
Tens digit (0 ~ 1)
Ex) 03 : 3 units
16 : 16 units
K4 x n times
Ones digit (0 ~ 9)
* K4: Press for 2 seconds - automatic detection of MCUs' quantity
Step9 K2: long
Save Restart
* Press K1 for 2 seconds to exit without save regardless of setting step.
8-3 Outdoor unit option switch settings (cont.)