S&C IntelliRupter PulseCloser User Manual

Figure 3. The Setup>General>Site-Related>Device screen.
Device Section
Device Name
Enter a name for the IntelliRupter fault interrupter, up to 12 characters. See Figure 3.
This name is displayed at the top of every screen as “Connected to:”
Site-Related
Device Location
Enter a location for the IntelliRupter fault interrupter, up to 64 characters. This location
is displayed at the top of every screen as “Location:”
GPS Coordinates
The location data provided by the integrated Global Positioning System is automatically
displayed.
IntelliRupter Base Serial Number
The serial number is automatically read from the base memory module.
IntelliRupter Control Serial Number
This serial number is automatically read from the protection and control module.
Catalog Number
The catalog number is automatically read from the base memory module.
Base Memory Module Version Number
This eld displays the version number for the base memory module.
Optional Disconnect Switch Installed
Presence of the integral disconnect is automatically determined from the base memory
module.
S&C Instruction Sheet 766-530 15
General Setup

S&C IntelliRupter PulseCloser Specifications

General

Brand	S&C
Model	IntelliRupter PulseCloser
Category	Industrial Electrical
Language	English