Figure 15. The Setup>General>Software Versions screen.
Data for the installed version updates whenever a new software revision is installed.
See Figure 15. The expected value is stored in the IntelliLink software, and the installed
version is loaded from the connected control.
The latest control software revisions are available at the S&C Automation Customer
Support Portal, which requires an assigned user name and password.
Register for portal access at this link: www.sandc.com/en/support/sc-customer-
portal/.
Software Versions
Figure 16. The Setup>General>User Notes screen.
Enter any character used in a standard text le. Field capacity is 1000 characters. See
Figure 16.
User Notes
S&C Instruction Sheet 766-530 33
General Setup
To Next Page
Loading...
