S&C Instruction Sheet 461-509 25
Ethernet 1 (LAN)
In this panel, the network associated with the communications gateway local area
network (LAN) is de ned for management devices connecting to physical Ethernet Port 1.
See Figure 15. As noted earlier, the communications gateway ships with a default IP
address of 192.168.1.1, a NetMask equal to 255.255.255.0, and DHCP set to “On.” To modify
these values for the communications gateway LAN, the elds that require identi cation
are Static IP Address, NetMask, and DHCP Server.
Note: The DHCP toggle button either enables or disables dynamic host control
protocol (DHCP) services on physical Ethernet Port 1.
Figure 15. The Ethernet 1 (LAN) panel.
Con guring the Communications Gateway
To Next Page
Loading...
