S&C TripSaver II - Page 36

36 S&C Instruction Sheet 461-509
Import Configuration
Follow these steps to complete the Import Conguration function. See Figures 22
and 23.
STEP 1. Under the Gateway Conguration panel, click on the Import Conguration
button. A Web User Interface (WUI) dialog box appears.
STEP 2. Click on the Browse button, which invokes a Windows le navigation box.
STEP 3. Navigate to the le.
STEP 4. Highlight the le and click on the Open button. The highlighted le will then
be identied in the WUI dialog box.
STEP 5. Click on the Import button.
STEP 6. Click on the Save button.
Figure 22. The Import Configuration dialog box.
Figure 23. Import file navigation.
Conguring the Communications Gateway