S&C TripSaver II - Page 43

S&C Instruction Sheet 461-509 43
STEP 8.
When the gateway has completed processing the upgrade, a notication will
appear. See Figure 34. When the user clicks on the OK button on this
notication, the browser will display a screen indicating the gateway is
unavailable while it reboots. The gateway will take approximately 5 minutes
to reboot. The user interface will automatically load the Login screen after
the reboot completes. See Figure 11 on page 21. Log in and conrm the new
rmware has been installed successfully by going to the General Status
screen.
Figure 34. The dialog box showing the firmware upgrade is complete.
Conguring the Communications Gateway