S&C TripSaver II - Page 73

S&C Instruction Sheet 461-509 73
Enabling Remote Web Access
NOTICE
The Remote Web Access feature provides similar functionality to local access via
Ethernet Port 1. There are some limitations when accessing the Gateway via the
Remote Web Access feature:
• The Drop Open commands on the Gang/Local Operation screen will not be
available.
• The Enable command on the TripSaver II Service Center Configuration Software
screen will not be available.
Follow these steps to enable the Remote Web Access feature:
STEP 1. On the Prole screen, the gateway admin password must be changed locally
from the default password.
STEP 2. On the Security Settings screen, the Remote Web Access function must be set
to the On position. See Figure 69.
Figure 69. The Remote Web Access slide selector.
Conguring the Communications Gateway