Chapter 5. The Main Menu 45
5.8. Recording
5.8.1. While Recording Screen
Figure 5.3.: The while recording screen
Selecting the Recording option in the Main Menu enters the Recording Screen,
whilst pressing Long Select enters the Recording Settings (see section 10 (page 83)).
The Recording Screen shows the time elapsed and the size of the file being recorded.
A peak meter is present to allow you set gain correctly. There is also a volume setting,
this will only affect the output level of the player and does not affect the recorded sound.
If enabled in the peak meter settings, a counter in front of the peak meters shows the
number of times the clip indicator was activated during recording. The counter is reset
to zero when starting a new recording.
The frequency and channels settings are shown in the status bar.
The controls for this screen are:
The Rockbox manual (version rUnversioned directory-150220)Sansa e200 and e200R Series
To Next Page
Loading...
Need help?
General
