MULTI-PORT OPTICAL POWER METER MPM-210H
19 / 59
4.8. Inserting a module
The MPM-210H (Main frame) is used to insert some modules (MPM-211/MPM-
212/MPM-213/MPM-215). With the power off, please insert the module while
paying attention to the orientation of the module. After inserting it, fix it with the
knurled screw on the top of the module. The MPM-210H cannot allow you to
insert any previous modules (MPM-10/MPM-20).
Insertion of an incompatible module may cause equipment failure. Moreover,
please fix the module using knurled screw after inserting each module.
To Next Page
Loading...
