Santec MPM-210H - Measurement-Related Commands

MPM-210H OPERATION MANUAL
30 / 59
10. SUBNET
Description
Set up Subnet Mask.
Syntax
SUBNET<wsp><www.xxx,yyy,zzz>
Parameters
<www.xxx,yyy,zzz>: 0 ~ 255
Default
255. 255. 255.0
Example
SUBNET 255. 255. 255.0
11. SUBNET?
Description
Check Subnet Mask
Syntax
SUBNET?
Response
<www.xxx,yyy,zzz>
Example
SUBNET?
Response: 255. 255. 255.0
12. IP
Description
Set up IP Address.
Syntax
IP<wsp><www.xxx,yyy,zzz>
Parameters
<www.xxx,yyy,zzz>: 0 ~ 255
Default
192.168.1.161
Example
IP 192.168.1.161
13. IP?
Description
Check IP Address.
Syntax
IP?
Response
<www.xxx,yyy,zzz>
Example
IP?
Response: 192.168.1.161
5.5.4. Measurement-related commands
1. TRIG
Description
If measuring mode is ‘CONSTx’, it checks for measuring
trigger.
Syntax
TRIG<wsp><value>
Parameters
<value>