MULTI-PORT OPTICAL POWER METER MPM-210H
57 / 59
10. Re-packing and shipping
Special attention for re-packing and shipping is required when you ship the
instrument for repair or to a remote location.
10.1. Re-packing
Please make sure that the original shipping box is used during the shipment,
according to the following instructions. If the original shipping box is misplaced
or damaged, please contact our customer service department. We can arrange
for the shipping box to be sent to you.
Alternately, when the original shipping box is not available, send the instrument
with a sturdy, robust shipping box and at least 10cm packing material between
the instrument and the shipping box. The entire 10cm space on every side of
the instrument should be filled with a cushioning material.
The packing materials we used are designed to protect the instrument from
the shock or vibration during the shipment. If the instrument is shipped
without packing materials or improperly packed, the instrument might be
damaged. Any instrument damage that occurred when the instrument
shipped without the original shipping box or without proper packing will not
be applicable for warranty repair, even during the guaranteed term.
10.2. Shipping
Treat the box carefully, and avoid shock or vibration as much as possible.
Maintain the box in an upright position and label “THIS SIDE UP” in several
places.
To Next Page
Loading...
