Santec MPM-210H - Page 7

MULTI-PORT OPTICAL POWER METER MPM-210H
7 / 59
5.3. RS-232 Communication ................................................24
5.3.1 RS-232 Communication Set up ...................................... 24
5.3.2 RS-232 Connection ...................................................... 25
5.4. Commands Form .........................................................25
5.5. Commands .................................................................26
5.5.1. Commands list ............................................................ 26
5.5.2. Command compatible with the previous MPM-210 model ... 27
5.5.3. System-related commands............................................ 27
5.5.4. Measurement-related commands ................................... 30
5.5.5 ERR? .......................................................................... 42
5.5.6 A method for wavelength compensation .......................... 44
5.5.7 Measurement range (LEV/LEV?/DLEV/DLEV?) .................. 45
5.6. Logging mode .............................................................46
5.6.1. Measurement mode (WMOD) ........................................ 46
5.6.2. Fast Gain Switching Average Time .................................. 46
5.6.3. Measurement data point setting (LOGN) ......................... 47
5.6.4. LOGG? ....................................................................... 47
5.6.5. “FREERUN” measurement mode (CEM Mode) .................. 50
5.6.6. Sample code for FREERUN Command ............................. 50
5.6.7. Sample code for SME mode measurement ....................... 51
6. Trigger Input/Output .................... 52
6.1. Trigger Input...............................................................52
6.2. Trigger Output ............................................................52
7. Analog Output (MPM-212) ............. 53
8. Specifications ................................ 54
8.1. Specifications ..............................................................54
8.2. Regulations conformity .................................................55
9. Maintenance ................................. 56
9.1 Daily Maintenance .......................................................56
9.2 Cleaning the Optical Power Sensor .................................56
9.3 Replacing Fuses ...........................................................56