SATO CL408 - Page 121

Programming Manual 3. Command Code Quick Reference
SATO RISC Printers 121
bb = Narrow space in dots (01-99)
cc = Wide space in dots (01-99)
dd = Narrow bar in dots (01-99)
ee = Wide bar in dots (01-99)
BVaaa,bbb,
cccccc,dddd,
ee...e Maxicode. Prints Version 0 2-D Maxicode symbols.
aaa = Service class, numeric only (001-999).
bbb = Country code, numeric only (001-999).
cccccc= ZIP code, alphanumeric (000000-999999).
dddd = Extended ZIP code, numeric only (0001-
9999)
ee...e = Low priority message, alphanumeric, 84 cha-
racters.
BWaabbb Bar Codes - Expansion. Works together with the BT
command to specify an expansion factor and the bar
code height for the particular symbol being printed.
aa = Expansion factor by which the width of all bars
and spacesis increased (01-12)
bbb = Bar height by dot (004-600 dots)
BXaabbccdd
eeefffghh Data Matrix - Data Format. Specifies the format of the
Data Matrix 2-D symbology.
aa = Format ID (01-16, The values 07 and 17 will
not be accepted)
bb = Error correction level (00, 01, or 04-14, the
values 02, 03 or
>/= 15 will not be accepted).
cc = Horizontal cell size (03-12 dots/cell)
dd = Vertical cell size (03-12 dots per cell)
eee = Cells per line. Must use 000 for optimized sym-
bol.
fff = Cell lines. Must use 000 to optimize.
g = Mirror image
0 Normal Print
1 Reverse Print
hh = Guide cell thickness (01-15) 01 indicates nor-
mal type.