Programming Manual 3. Command Code Quick Reference
SATO RISC Printers 123
FXaaabccc
dddeee Data Matrix. Sequential Numbering. Prints sequential
numbered Data Matrix 2-D symbols.
aaa = Number of duplicate labels (001-999)
b = Increment or decrement
+ Increment
- Decrement
ccc = Increment/decrement steps (001-999)
ddd = Sequential numbering start position (001-999).
Referenced to left side.
eee = Incremented data length (001-999). Measured
from start position.
Gabbbccc
(data) Custom Graphics. Allows the creation and printing of
graphic images using a dot-addressable matrix.
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal 8 x 8 blocks (001-152)
ccc = Number of vertical 8 x 8 blocks
(001-178 or 001-356 for 14" label)
data = Data to describe the graphic image
GPaaaaa PCX File. Downloads PCX file to the internal graphics
image memory.
aaaaa = No. of bytes to be downloaded
(max DOS file size = 32K)
Haaaa Horizontal Position. Specifies a field’s horizontal
location across the width of the label from the current
base reference point. The units of measurement are
dots.
IDaa Store Job ID. Stores the Job ID number.
aa = Job ID number assigned (01-99)
J Journal Print. Provides the ability to print text line by
line. Fixed spacing between lines and characters.
Kab90cc Recall Custom Designed Characters. Recalls for
printing a custom character stored by the Tabcc(data)
command.
a=116x16matrix
To Next Page
Loading...
