SATO CL6NX User Manual

[Printing] Menu
660
Initial ValueSetting Item
CL4NX CL6NX
User
Reset
Factory
Reset
[Advanced]
[Calibrate]
[Auto-calibration]
1 Gap + I-Mark - -
[GAP Levels] Value adjusted by the factory. No No
[GAP Slice Level] Auto No No
[I-Mark Levels] Value adjusted by the factory. No No
[I-Mark Slice Level] Auto No No
[Head Check] Off Yes Yes
[Head Check Mode] Always Yes Yes
[Every Page] 1 Yes Yes
[Check Media Size] Disabled Yes Yes
[Adjustments]
[Offset] 0 dot No No
[Pitch] 0 dot No No
[Darkness Adjust] 50 No No
[Start Online] Enabled Yes Yes
[Feed After Error] Disabled Yes Yes
[Feed At Power On] Disabled Yes Yes
[Finisher Feed] 0 dot (Standard) Yes Yes
[Paper End] Using I-mark Yes Yes
[Head Base Position] Standard Yes Yes
[Prioritize] Commands Yes Yes
[Reprint] Disabled Yes Yes
[Print End Position] 0 dot Yes Yes
[Label Near End] Disabled Yes Yes
1
Auto-calibration is not available for linerless models.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g