SATO PW208NX - Page 67

64
Mobile printer PW208NX/PW208mNX
Starting Up the Printer
Darkness Adjust
Printing > Advanced > Adjustments > Darkness Adjust
Fine tune the print darkness.
Initial value : 50
Setting range : 0 to 99
Notes
• 0 is the lightest and 99 is the darkest.
• Refer to “Darkness” (

page 54).
Start Online
Printing > Advanced > Start Online
Set the status when the printer starts.
Initial setting : Enabled
Setting options : Enabled, Disabled
Enabled: The printing (online) screen is displayed when the printer is powered
on.
Disabled: The ofine (stop) screen is displayed when the printer is powered
on.
Feed After Error
Printing > Advanced > Feed After Error
Set whether the printer feeds one sheet of the media roll and switches to the printing
(online) screen automatically after it recovers from an error.
Initial setting : Disabled
Setting options : Enabled, Disabled
Enabled: The printer feeds the media by one sheet after recovering from an
error and changes to the printing (online) screen.
Disabled: The ofine (stop) screen is displayed after the printer recovers from
an error. Even if you manually switch to the printing (online) screen,
the printer does not feed the media by one sheet.