SBC PCD7.LR P5 Series - The PG5 Device Configurator Program; Requirement for Operation; General

Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG

Congure
6-2
6
6.1 ThePG5“DeviceCongurator”program


6.1.1 Requirement for operation
The following description assumes you are familiar with the PG5 software.
Information on the PG5 software, programming, tools, etc. can be found in the

Manuals are never as up-to-date as the help pages for the relevant PG5 suite
tool.
6.1.2 General
This section describes how the Saia PG5
®


- Cyclical media mapping to facilitate a link between peripheral

- Direct access to programming instructions to read out or hand over values from
the peripheral module.