Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG
Information for commissioning
General guidance
2-9
2
2.7 Information for commissioning
2.7.1 Safety information
To ensure safe operation, the PCD7.LRxx-P5 room controllers must only be op-
-
nel are persons who are trained in the installation, commissioning and operation of
During use, the applicable legal and safety regulations for the application in ques-
tion must also be observed.
The room controllers have undergone extensive output testing, ensuring they left
the factory in perfect condition.
Before commissioning, the devices must be inspected for possible damage due to
improper transport or storage.
If the label numbers are removed, the warranty is rendered invalid.
observe these limits can lead to defects in the modules and connected peripheral
devices. We do not accept any responsibility for damage resulting from improper
use.
The plug connections must never be connected or disconnected when live. Ensure
Please read this manual carefully before installing and commissioning the mod-
ules. The manual contains information and warnings that must be observed in
order to ensure safe operation.
To Next Page
Loading...
Need help?
General
