Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG
Watchdog (software)
Room controller/CPU
3-20
3
3.10.2 Restart the controller with RUN/HALT button
Action Display
Controller program is running (operation = RUN).
(RUN/HALT key has not yet been pressed.)
!
RUN/HALT key has been pressed, which has led to a program STOP.
The controller indicates this with a yellow LED below the symbol
consisting of an exclamation mark inside a triangle.
!
Pressing the RUN/HALT key again restarts the controller.
!
To Next Page
Loading...
Need help?
General
