Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG
Inputs/outputs (I/O)
4-1
4
4 Inputs and outputs
4.1 Connection overview and functions
4.2 Universal inputs
4.3 Digital outputs
4.4 Analogue outputs
4.5 Connection examples
This section describes the inputs and outputs of the PCD7.LRxx-P5 controllers in
terms of their function and terminal assignment.
Please note: There is one labeling foil per housing size. Means that terminal
names are present but the terminals are physically missing. The following two
about this.
Inputs and outputs can be found in two locations. These are:
- on-board (in the controller)
- on E-Line RIOs
To Next Page
Loading...
