Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG
Appendix
A-11
A
A.5.1 ClassicationunderEN60730-1
EN 60730 subsection EN 60730-2-9
Ambient conditions For use in environments
in residential buildings (residential, commercial and light industry)
Construction Independently-mounted controller for panel mounting
Action Type 1.C
Nominal pulse voltage 2500 V at 230 V, 500 V at 24 V
Degree of pollution 2
Protection against impact Class 0 (without terminal covers)
Class II (with terminal covers)
Software class Class A
A.5.2 ClassicationunderEN60529
(Protection class provided by the housing)
IP20 In the case of controllers that are installed outside a control cabinet, the
protective terminal covers (large pack of ten, order no. IRM-RLC for large hous-
ing and IRM-RSC for small housing) must be mounted before connection to the
device’s power supply in order to achieve IP30 conformity.
To Next Page
Loading...
Need help?
General
