SBC PCD7.LR P5 Series - Using the SBC S-Bus Protocol

Hardware manual PCD7.LRxx-PG5 room controller │ Document 27-653; version ENG07 │ 2019-03-21
Saia-Burgess Controls AG Communication
5
5-3
Using the SBC S-Bus protocol
5.2 Using the SBC S-Bus protocol
The SBC S-Bus stands for the proprietary communication protocol of the Saia
PCD
®
. More information can be found in the manual

The SBC S-Bus is essentially designed for communication with the engineering
and debugging tools, as well as connecting management levels/process control
systems/room controllers.
󰀨

more practical.