Scaime eNod4-B - 1 Enod4 Product Range; General Presentation; Versions; Communication Protocol Versions

7/95
User manual SCAIME: NU-soft-eNod4B-E-0716_236704-C.doc
1 ENOD4 PRODUCT RANGE
1.1 General presentation
eNod4 is a high speed digital process transmitter with programmable functions and powerful signal processing
capabilities. eNod4 offers operating modes for advanced process control both static and dynamic.
Quick and accurate:
• Analog to digital conversion rate up to 1920 meas/s with maximum scaled resolution of ±500 000 points.
• Digital filtering and measurement scaling.
• Measurement transmission up to 1 000 meas/s.
Easy to integrate into automated system:
• USB, RS485 and CAN communication interfaces supporting ModBus RTU, CANopen® and PROFIBUS-DPV1
(depending on version) communication protocols.
• Digital Inputs/Outputs for process control.
• Setting of node number by rotary switches and communication baud rate by dip switches.
• Integrated selectable network termination resistors.
• Wiring by plug-in terminal blocs.
1.2 Versions
1.2.1 Communication protocol versions
• Strain gauges load-cell conditioner with CANopen® and ModBus RTU communication.
• Strain gauges load-cell conditioner with Profibus DP-V1 and ModBus RTU communication.
• Strain gauges load-cell conditioner with Modbus TCP and ModBus RTU communication.
• Strain gauges load-cell conditioner with EtherNet/IP and ModBus RTU communication.
• Strain gauges load-cell conditioner with Profinet IO and ModBus RTU communication.
• Strain gauges load-cell conditioner with EtherCAT and ModBus RTU communication.
EDS, GSD, ESI and GSDML configuration files for above protocols can be downloaded from our web site:
http://www.scaime.com
1.2.2 IO+ version
In conjunction with all communication protocol versions, eNod4 can supports an opto-insulated board fitted with:
• 2 additional digital inputs and 1 speed sensor dedicated input.
• 0-5V or 0-10V analog output voltage.
• 4-20mA, 0-24mA, 0-20mA or 4-20mA with alarm at 3.6mA analog output current.