Scaime eNod4-B - Flow Rate Time Unit; Save Tare and Zero in Non-Volatile Memory

79/95
User manual SCAIME: NU-soft-eNod4B-E-0716_236704-C.doc
14.2.9 Flow rate time unit
It is possible to store the display flow rate time unit into the eNod4.
Flow rate time unit is a combination of 2 characters and there is no automatic calculation to adjust flow rate value if
modified.
In belt mode, following values are permitted for flow rate time unit parameter:
• second (s)
• hour (h)
Note: weight and flow rate time units lead eNod4 to handle the following flow rate units:
• Gram per second (g/s)
• Kilogram per second(kg/s)
• Kilogram per hour (kg/h)
• Ton per hour (t/h)
14.2.10 Save Tare and Zero in non-volatile memory
There are two options for saving TARE or ZERO request value in non-volatile memory. These options are accessible
through the “dosing cycle options” Object.