Scaime eNod4-B - Enodview Software

8/95
User manual SCAIME: NU-soft-eNod4B-E-0716_236704-C.doc
1.3 eNodView Software
So as to configure eNod4, SCAIME provides eNodView software tool. eNodView is the software dedicated to eNod
devices and digital load cell configuration from a PC. This simple graphical interface allows accessing the whole
functionalities of eNod4 for a complete setting according to the application.
eNodView features and functions:
• eNod4 control from a PC
• Calibration system
• Modification/record of all parameters
• Measure acquisition with graphical display
• Numerical filters simulation
• Frequential analysis FFT
• Process control
• Network parameter
eNodView software is available in English and French version and can be downloaded from our web site:
http://www.scaime.com or ordered to our sales department on a CD-ROM support.