Schiller AT-10 plus - Safety Notes; User Responsibility in Safety; Intended Use of Device; Organizational Safety Measures

Page 3
Service Handbook
Art.-no.: 2.540043 Rev.: a
AT-10 plus
Contents
1 Safety notes ..............................................7
1.1 Responsibility of the user ................................................... 7
1.2 Intended use ......................................................................... 7
1.3 Organisational measures..................................................... 7
1.4 Safety-conscious operation ................................................ 8
1.5 Safety facilities ..................................................................... 8
1.6 Operation with other devices .............................................. 8
1.7 Safety Symbols and Pictograms......................................... 9
1.7.1 Used symbols in this document ......................................................... 9
1.7.2 Used symbols on the device ............................................................ 10
1.8 Terms of warranty .............................................................. 10
2 Introduction ............................................11
2.1 Features............................................................................... 11
2.1.1 Standard........................................................................................... 11
2.1.2 Options............................................................................................. 11
2.1.3 Connectors....................................................................................... 11
2.2 LCD screen.......................................................................... 12
2.2.1 Keypad............................................................................................. 13
2.3 External connections ......................................................... 15
2.3.1 Back Panel....................................................................................... 15
2.3.2 Side panel ........................................................................................ 16
3 Operation Overview ............................... 17
3.1 Start-up and initial preparation ......................................... 17
3.1.1 Location............................................................................................ 17
3.1.2 Connection of external cable assemblies and ancillary equipment.. 17
3.1.3 Potential equalisation....................................................................... 17
3.1.4 Switching on and off......................................................................... 18
3.1.5 Power supply and battery operation................................................. 18
3.1.6 Isolating the mains supply................................................................ 18
3.1.7 System and ECG settings................................................................ 18
3.2 Selecting menu options using the arrow keys ................ 19
4 Service Screen ........................................ 20
4.1 ECG...................................................................................... 20
4.2 NIBP ..................................................................................... 21
4.3 Spiro .................................................................................... 21
4.4 HW-Config ........................................................................... 21
4.5 I / O ports............................................................................. 22
4.5.1 Checking the RS-232 ports.............................................................. 22
4.5.2 Checking the analogue ports ........................................................... 23
4.6 Character............................................................................. 23
4.7 Colour .................................................................................. 24
4.8 Test ...................................................................................... 24