Schiller FRED easy - Page 41

Page 39
Defibrillation 4
User Guide Semi-automatic defibrillation 4.4
Art. no.: 0-48-0013 Rev. m
FRED easy
Step 3 Shock delivery
6. Deliver the shock by pressing the button .
After the shock delivery, proceed with Step 4 Performing cardiopulmonary resus-
citation.
Step 4 Performing cardiopulmonary resuscitation
7. Perform a CPR cycle. According to the configuration of the device, a CPR cycle
consists of:
– performing chest compressions for the set period of time, or
– alternately performing 30 chest compressions and 2 breathes for the set period
of time.
After the CPR cycle, the device continues with Step 2 Analysing the ECG signal.
Finishing the therapy See 4.8 Finishing the therapy.
When the energy is charged, the user is prompted to trigger the shock by pressing the
lit orange button.
Shock hazard!
 Do not, under any circumstances, touch the patient during shock delivery.
 Make sure that the patient does not touch any conducting objects.
Fig. 4.8 Button to deliver the shock
If the device is configured to start the ECG analysis automatically, the device will not
require any action from the user to run the ECG analysis.