106
Nu (GAME BOARD)
● When turning the server machine′s main power switch OFF during operating
hours, ensure that there are no players using the connected cabinets before doing
so. Once the main power switch is turned OFF, network transmissions are no
longer possible.
Furthermore, start the server machine before powering up each cabinet. If
the server machine is started afterward, the in-store network may not operate
correctly.
● Static electricity from your body may damage some electronics devices on the IC
board. Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.
● In this product, setting changes are made during the TEST MODE. If you are
operating 1 machine by itself, there is no need to congure the Nu′s DIP switches.
Leave the Nu at its factory default settings, as changing these could result in
malfunction or damage to parts.
● Use with the DIP switches on the Nu at the prescribed settings. If settings do not
match the product, an error message will be displayed. In some cases, the game
cannot be started.
15
To Next Page
Loading...
