54
PRECAUTIONS WHEN MOVING THE MACHINE
8
PRECAUTIONS WHEN MOVING THE MACHINE
● As used in these instructions, the term "moving" refers to moving of the
product within the same building, store or facility. These instructions do not
cover moving between different buildings, areas, stores or facilities, since
diverse factors are involved, not only packaging but also loading onto transport
vehicles, and securing the product in place during transport. To transport the
product to a different building or store, contact the ofce listed in this manual
or the point-of-purchase for this product.
● Never disassemble the unit in ways other than those described in this manual.
Doing so can cause accidents such as electric shocks, short circuits, and res.
● When moving the machine, be sure to pull out the plug from the power supply.
Moving the machine with the plug still inserted can cause the power cable to be
damaged, resulting in a re and/or electric shock.
● When moving the machine on the oor, retract the adjusters, and ensure that
the casters make contact with the oor. Pay careful attention so that the casters
do not run over power cable and other cables. Damaging cables can cause an
electrocution, short circuit or re.
● When holding heavy objects, pay special attention to where the object is being
held. As much as possible, hold objects by their grips or bottom surfaces. If the
object is held by a component of weak material or by an attachment that is not
sturdy, the component or attachment could be damaged by the weight of the
object, causing the object to drop or fall over, resulting in bodily injuries and/or
damages.
● Do not place products where there are surface inclines or level differences.
Otherwise the unit could fall over. These units could also move suddenly and
cause accidents.
● Be careful in handling glass/plastic parts. If such parts are exposed to
excessive loads or impact, they might become damaged, resulting in fragments
or cracks that could cause accidental injury.
● When moving the cabinet, do not hold or push any parts other than those
designated. Careless handling could cause these parts to break, and broken
pieces may cause personal injury.
8
To Next Page
Loading...
