Sega Project DIVA Arcade Future Tone - Assembly and Installation

ASSEMBLY AND INSTALLATION
19
6
ASSEMBLY AND INSTALLATION
● This work should be performed by site maintenance personnel or other
qualied professionals. Work performed by non-technical personnel can cause
a severe accident such as an electric shock.
● Be mindful of your surroundings if 2 or more workers are servicing this product
at once. Failing to do so could cause collisions and contact with parts.
In addition, if workers are working on different parts separately and make a
mistake in the assembly order, it could cause an unforeseeable accident and/or
make it impossible to assemble the product correctly.
● For any work listed in this manual that requires more than 1 person, be sure to
perform the work with at least the number of people specied. Performing work
with less than the specied number of people makes the work more difcult
and may cause accidents.
● To perform work safely and securely, be sure to prepare a stepstool which is in
a secure and stable condition. Performing work without using the stepstool can
cause violent falling down accidents.
● Exercise proper caution when using a stepstool to perform work. Falling or
tipping over could result in a major accident. Also, if the ceiling is low, you
could bump your head.
● Check to see if the casters and adjusters are damaged. Operating the product
with damaged parts may lead to the product falling over.
● Check if all of the adjusters are in contact with the oor. If they are not, the
cabinet can move and cause an accident.
● To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
● Ensure that plenty of space an lighting are available for assembly and
installation. Performing these tasks in an unsuitable environment may cause
accidents.
● Be sure to perform grounding appropriately. Inappropriate grounding can cause
an electric shock. Otherwise there could be faulty, erroneous operations and/or
damage to the parts.
● Ensure that connectors are accurately connected. Improper connections can
cause an electric shock, short circuit or re.
● Be careful not to damage the cables. Damaged cables may cause an electric
shock, short circuit or re.
6
http://op.sega.jp/op_e/