70
CONTROL PANEL
12
CONTROL PANEL
● This work should be performed by site maintenance personnel or other
qualied professionals. Work performed by non-technical personnel can cause
a severe accident such as an electric shock.
● Before starting work, be sure to turn the power off. Working without turning the
power off can cause an electric shock, short circuit or re.
● Be careful not to damage the cables. Damaged cables may cause an electric
shock, short circuit or re.
● Be careful not to catch your ngers when opening or closing the control panel.
● Perform work with the control panel open. If the control panel closes under its
own weight, it may catch hands or ngers, resulting in injury.
When turning the server machine's main power switch OFF during operating hours,
ensure that there are no players using the connected cabinets before doing so. Once
the main power switch is turned OFF, network transmissions are no longer possible.
Furthermore, start the server machine before powering up each cabinet. If the server
machine is started afterward, the in-store network may not operate correctly.
12
To Next Page
Loading...
