ASSEMBLY AND INSTALLATION
31
6-4
ATTACHING THE KEY CHIP AND CONNECTING THE LAN CABLE
● Do not leave the LAN cable exposed over passageways. Exposure could lead to
damage and electric shock or short circuit. When laying wiring across the oor,
always use safety covers to protect the cables.
● To prevent anyone other than store personnel from disconnecting cables
connected to network communication devices, be sure to consider the layout
of the devices, and wiring method and protection. Failure to observe this may
cause an electric shock or short circuit.
● If a network system is carelessly set up and run, it may be easily tampered with
and lead to trouble such as communication errors and data corruption. Given
the need to prevent such trouble and tampering, it is recommended that a skilled
professional who can set up and run a network be contracted to perform the work.
● The key chip is a precision device. It can be damaged by heat, impact, and static
electricity. Exercise caution in handling this equipment.
When performing work inside the front door, be careful not to hit your head on the
control panel sticking out in front.
This product requires a connection to an external network (ALL.Net.)
Since network environments (devices, facilities, etc.) will vary depending on the store, contact the ofce listed in
this manual for details on connecting to the external network (ALL.Net.)
6
To Next Page
Loading...
