PRECAUTIONS WHEN MOVING THE MACHINE
55
● When turning the server machine′s main power switch OFF during operating
hours, ensure that there are no players using the connected cabinets before doing
so. Once the main power switch is turned OFF, network transmissions are no
longer possible.
Furthermore, start the server machine before powering up each cabinet. If
the server machine is started afterward, the in-store network may not operate
correctly.
● To prevent scratches on the surface, do not allow rope to come into direct contact
with the surface of the cabinet. Use a protective layer between the rope and the
cabinet.
● Moving casters over the floor surface can damage the floor, depending on its
material. Have available a mat for moving casters over the oor. If there is a rug or
carpet on the oor, remove it before moving the unit.
8
To Next Page
Loading...
