18
PRECAUTIONS WHEN MOVING
7
PRECAUTIONS WHEN MOVING
7
Carefully observe the following when moving the product. Failure to follow these
instructions may result in personal injury during movement and/or damage to the
cabinet.
• Disconnect the power cord plug before moving the product. Be careful not to
damage the power cable during movement.
• To move the product over the floor, retract the adjusters and have the casters
come in contact with the floor.
• After the casters are in contact with the floor, exercise special caution, as the
unit could move by itself if the floor is inclined.
• To lift the cabinet, always lift it holding the bottom. If you lift the cabinet holding
other areas, parts or attachments could be damaged due to the weight of the
cabinet.
• Do not press on glass components while moving the product. Careless
handling could cause damage to other parts. Fragments may also cause
injury.
• When moving the cabinet over areas with level differences and the cabinet
is projected to tilt due to the incline, attach shipping brackets and secure the
UFO mechanism in place. If the UFO mechanism is not secured in place, parts
could be damaged.
FIG. 7b
FIG. 7a
Do not press on glass components.
Do not press on glass components
while moving the product.
Otherwise glass may be damaged and
cause injuries. Press on the cabinet's
metal plates.