20
PRIZE REPLACEMENT
8
CHANGING THE PRIZE DROP-OUT SLOT
If arm L has been attached for large-size prizes, enlarge the prize drop-out slot.
(These instructions are for the 2P side drop-out slot.)
1. Loosen the 2 plastic-head screws.
2. Support the bottom of the corner partition and slide it
to widen the drop-out slot. Do not press down on the
top of the corner partition (acrylic) to slide. Excessive
force could damage components.
3. Tighten the 2 plastic-head screws that were loosened.
PHOTO 8a
PHOTO 8
b
PHOTO 8c
To Next Page
Loading...
