34
DIP SW SETTINGS
12
METER SETTINGS
TOTAL COIN (4 are counted for $1) /TOTAL PRIZE
- METER 1: 1P + 2P total coins
are counted.
- METER 2: 1P + 2P total prizes are counted.
TOTAL COIN (25¢) /TOTAL BILL
- METER 1: 1P + 2P total 25-cent coins are counted.
- METER 2: 1P + 2P total bills are counted. 1 is counted for $1.
1P PRIZE/2P PRIZE
- METER 1: 1P prizes are counted.
- METER 2: 2P prizes are counted.
1P BILL/2P BILL
- METER 1: 1P, 1 is counted for $1
- METER 2: 2P, 1 is counted for $1
CRIME PREVENTION MODE
To prevent theft, an alarm sounds whenever the prize sensor activates during customer-standby status.
PRIZE COUNT (during customer-standby)
If the prize sensor activates during customer-standby, there is an option to count it as a prize-out or not. (Prize-out
is counted even while crime prevention mode is operating)
ERROR RETRY
Will retry once when an error occurs.
SETTING GAME OPERATIONS FOR 1P AND 2P SEPERATELY
Settings can be changed for game operations on the 1P side using DIP SW 3 and the 2P side using DIP SW 4.
PLAY TIME
Sets the time period during which manipulations can be made during game play.
GAME MODE
NORMAL MODE (1credit for 1game)
1 credit allows for 1 game to be played.
TIMER MODE (Games can be played any number of times during the time period.)
Games can be played any number of times if still within the time period.
TICKET OUT
Sets the amount of tickets dispensed for 1 game.
NOTE: Ticket dispenser is an optional item.
DISPLAY MODE
Setting so that games cannot be played (for display, etc.).
In this mode, coins are not accepted and games cannot be played. All of the 7-seg displays read “-” and coins are
returned. Initialization also does not take place.
PRIZE SENSOR
Setting to use the prize sensor. Prize sensor is used when set to [ON]. If the sensor breaks down, set to [OFF].
The sensor will not respond to any action and prizes are not counted when obtained.
Even when set to ON and the sensor is broken, [Crime Prevention Mode] and [Prize Count (during customer-
standby)] will not work.