73
OPTIONAL ITEMS
21
6. Attach the LCD unit hook to backboard A (the side
with no sticker should face the outer side of the
cabinet).
PHOTO
21-3o
7. Load backboard A onto the cabinet rear panel, then secure it in place by reversing the steps used to remove the
truss screw in the center and the 2 tamperproof screws on the left and right from backboard B. Hold backboard A
at this time so it will not fall while working.
8. Secure in place with 2 truss screws from inside the cabinet.
PHOTO
21-3qPHOTO 21-3p
9. Suspend the LCD unit on the LCD hooks.
Have 2 people do this job, as the assembled LCD unit
weighs over 15 kg.
PHOTO
21-3r
To Next Page
Loading...
