79
OPTIONAL ITEMS
21
10. Secure the ticket bin in place using the 4 flange nuts, and after securing the wire harness to the cord clamp,
connect the level sensor switch’s faston terminal.
NOTE: When securing the wire harness, secure the earth wire to the 2 cord clamps backside. Also, make sure there
isn’t too much slack in the wire harness extending from the cabinet.
PHOTO
21-4lFIG. 21-4 FASTON TERMINAL
PHOTO 21-4m
How to Set Tickets
After you are finished attaching the ticket dispenser, turn the power on, set the tickets, then press the button to adjust.
Refer to the user’s manual for the ticket dispenser for additional details.
PHOTO
21-4n
To Next Page
Loading...
