Seismic Source BOOM BOX 3 User Manual

25 BOOM BOX 3 Dynamite Controller
7. A3 Repeater Encoder and A3 Repeater Operation
7.1 A3 Repeater Encoder Operation
The Boom Box 3 system can be used in an A3 Repeater Encoder/Repeater Mode. This Mode is
used when the radio reception from the Encoder to the Decoder requires a radio repeater. This is
typically a problem in very mountainous areas.
In this mode, one Boom Box 3 is selected to be in A3 Repeater Encoder Mode. Another Boom
Box 3 or the Boom Box can be used as the repeating decoder.
• The Boom Box 3 can be placed into the A3 Repeater Encoder mode by changing the
operating mode with the Wi-Fi web interface, SourceLink or Source Control F3.
• The Wi-Fi web interface, SourceLink or Source Control F3 can be used to select the
repeater ID of the Repeater Decoder Unit ID.
• The Crew ID of the A3 Repeater Encoder must match the repeating Decoder and shooting
Decoder.
• A3 Repeater Encoder requires the Encoder Start Delay to be 1500 or more.

Seismic Source BOOM BOX 3 Specifications

General

Brand	Seismic Source
Model	BOOM BOX 3
Category	Controller
Language	English