Seismic Source BOOM BOX 3 User Manual

49 BOOM BOX 3 Dynamite Controller
13. Wi-Fi Web Interface
The Boom Box 3 Wi-Fi Interface can be used to
• Load operating parameters
• View uphole data
• View current status of resistance test
• Load and store all uphole information from Boom Box 3
13.1. Software Installation and Setup
Boom Box3 Wi-Fi interface does not need any installation. The built in Wi-Fi interface of Boom
Box3 unit can communicate with Web Browsers (Internet Explorer, Safari, Google Chrome, etc.)
in most common Cell phones, Tablets and Computers with Wi-Fi connectivity.
13.1.1 Connecting to a Unit through Web Browser
• Open the Wireless network selection menu in your Cell Phone/Tablet/Computer.
• Connect to the Network with the SSID - “BoomBox6xxx”.
• Open your web browser (Internet Explorer, Safari, Google Chrome, etc.)
• Type in 192.168.1.1 into your web browser and open the page.
• It is recommended to add this 192.168.1.1 page to your favorites and create an icon.
• Boom box Wi-Fi interface software will be ready to use now.
• For changing any advance parameters, a password may be required. The factory set
password is “BoomBox3”. Password is case sensitive.

Seismic Source BOOM BOX 3 Specifications

General

Brand	Seismic Source
Model	BOOM BOX 3
Category	Controller
Language	English