13.4.2 Next Shot Assignment
Before each shot the Shooter needs to assign Line/Station associated with the shot. This can be
done manually or automatically using the Map feature.
Web Interface Manual:
The user can type in the Next Shot Line/Station and Click “Apply Changes”.
Web Interface Automatic:
If a Shot point file is imported into Web interface, then the nearest flag will be displayed in the top
of the screen with the distance to the flag. The nearest flag will be automatically filled in the
Line/Station text boxes. The user can just verify the numbers and click “Apply” , and no need to
type in the Line/Station.
The user has the option to override this selection if needed, by typing in a Line/Station value
manually and click Apply.
Boom Box3 Internal:
Alternatively, the Source Points can also be loaded into Boom Box3 hardware memory directly
using SourceLink Software. In which case the BB3 display, will show the nearest flag and assign
near flag before shot. This operation is explained in detail in the Source Link section. The user can
also use the Web interface to modify the source point selected by BB3.
Source Link Harvest Automatic:
Alternatively, SourceLink software can also pick near shot points after the shots are taken, based
on the Shot GPS location. This is typically done during download process.
To Next Page
Loading...
Need help?
General