Seismic Source BOOM BOX 3 User Manual

User’s Manual
74
14.1.6 Uploading Source Points into BB3 Internal Memory
BoomBox3 allows loading Source Points to its internal memory. When the points are loaded into
the BB3 memory, BB3 can find the nearest shot point and distance real time and display/use the
Source point for reporting. Alternatively, the user can also use the Tablet/Mobile device to find or
set the Source Point, in which case loading the flags into BB3 internal memory is not necessary.
14.1.6.1 Using Selection window
Ctrl +Click on the points that are to be loaded into a Boom Box 3 and then hit upload.
14.1.6.2 Source Points Setup
Auto Near Point Selection – BB3 selects the nearest Source Point within the BB3 GPS position.

Seismic Source BOOM BOX 3 Specifications

General

Brand	Seismic Source
Model	BOOM BOX 3
Category	Controller
Language	English